Team Avishkaar Box
I am back again with a new Robotics model. Let's make a Moving Crane Bot this time. This is an advanced model made from Avishkaar Robotronics FULL and some additional accessories.
Steps for making a Moving Crane Bot
Step : 1
Take two long rectangular plates & add it as shown in image.
Step : 2
Now connect two L angle & two square plates at one side as in image.
Step : 3
Make a assembly with two L-angle, one square plate & a caster wheel.
Step : 4
Add it to the base of robot like this.
Step : 5
Fix two motors on both the square plates.
Step : 6
Now add filler, then a wheel to the both motor's shaft & fix it with the axle lock.
Step : 7
Now add one more motor to the base surface of the robot & fix it with the motor nuts.
Step : 8
Now letâ€™s make a gear assembly box by fixing two L angle on a square plate and two short rectangular plates on both L angle.
Step : 9
Now add a motor to one of the rectangular plate at center Hole no 3 from bottom of the plate & add two mini round gears to the shaft of motor.
Step : 10
Add a 4 inch axle shaft to the 6th center hole from the top of the same short rectangular plate.
Step : 11
Now add a long U with two big Gear & a flexible strip at the long U.
Step : 12
Add it with the gear train at Hole no 3 from top of the same plate.
Step : 13
Now mount that crane assembly to the 3rd motor connected with the base floor & fix it with the axle lock and you robot is ready to rock :)
Your Robot is Ready!
Facing any Challenge in the making? Send us an email at or drop a chat message here and we'll get back to you soon as soon as possible.
Made the Robot? Show off your innovation to the world! Post it on our Facebook Page .
Stay tuned for more such tutorials! :)